Sunday 11 August 2013

Iron Monger (Marvel Legends)

Marvel Legends Iron Monger
After all those random visits at Target and Wal-Mart (in Canada), I finally completed the Build-A-Figure Iron Monger along with getting those figures like Bleeding Edge, Ultron and others that carried Monger's BAF parts with them. I could have bought the last three parts/figures at BBTS, which they released three months before it finally showed up in the store, but I just don't wanna pay for shipping for these figures. I mean, you can easily find Hasbro Marvel Legends at your nearest supermarkets and shopping centres, so why go all through that expenses?















Taking a glance at this figure, I thought it is very cool looking but then again, Hasbro continually gave us Build-A-Figures that are shorter than those Toy Biz ones. In fact, it's even getting smaller and shorter for every Wave! But for me, as long as Hasbro keep showing improvements (though sometimes screwing things up) with creating and designing their action figures, I guess I'll be fine even with all their growth-deficient BAF's.


Like the Hasbro ML Ultron, Iron Monger primarily gets its colour from the plastic it's made of while this is being covered with a glossy outer layer that made this figure shine and shimmer. In addition to its gloss, this figure has some tiny dust-like glitters scattered across its armour that (although seem unnoticeable) adds a sort of metallic look on Monger. Still, you can see some of these swirls and twirls on its plastic but not as bad and obvious as that of Ultron.


In reference to the comic books, the rendition of this Iron Monger is phenomenally accurate. Given with extra bits of aesthetic features, Monger maintains its classic look; the rectangular arc reactor, the visor, and the all-blue armour. They added some muscle folds around its torso, a big charging port at its back, and lines and grids for a much fancier look. Also, I really like that they added a pair of these cable wires on each of its arms but with that antennae on its shoulder, I don't think if it's necessary to add that albeit rather can be permanently removed with customization.


Although I wasn't able to successfully make Monger do a "flying pose", like the Marvel Select Rhino, Monger can stand in one foot and execute a beautiful "charging pose" without the help of a clear stand. Despite its wider girth, this Marvel Legends figure has, probably, an average score in poseability, which isn't bad.


Monger has that ball and socket neck that lets his head turn 360 degrees, lean side to side and gaze down but hardly look upwards because of this collar around its neck. With its diaphragm joint, it is still achievable to get Monger to look up as well as other torso movements. Monger got ball-jointed shoulders that, if it wasn't for these stiff shoulder guards, may have get it to raise its arm all the way up. It has bicep swivel, ball-hinged elbows that lets it flex and swivel right at the elbow line and a couple of these wrist twists. The legs can kick forward and back, and at the sides. It has double-jointed knees, ball-hinged ankles that turns side to side while slightly hindered by the armour around its legs. Thankfully, its ankle pivots functions properly.


Standing at around 7.6 inches tall, it is in perfect scale with any standard Hasbro or Toy Biz Marvel Legends you'd like to throw beside it. Versus the Hulkbuster, Iron Monger is undeniably much leaner and shorter... as it should be though. Having read some positive reviews about this Build-A-Figure, no doubt this figure is a must-have for every Legends collector.


12 comments:

  1. Love Iron Monger! And this one looks great.

    ReplyDelete
    Replies
    1. Between the Iron Monger and the Hulkbuster, two are equally awesome!

      Delete
  2. Sooo cool!Congrats on the final assembly!

    ReplyDelete
    Replies
    1. There was like one Ultron figure (with my final piece) left on the shelf at Wal-Mart, and I'm lucky no one dared to pick it up or else, I'd still be looking out for this figure.

      Delete
  3. Bro, the armour is shining and give us a metallic feel..

    ReplyDelete
    Replies
    1. This Iron Monger is naturally shinny and shimmery but when I did its "photo shoot", I turned all the lights and placed aluminum foil in front of it to get a better shine.

      Delete
  4. You finally get it complete and assembled. Congrats.

    ReplyDelete
    Replies
    1. I completed the Terrax BAF Wave in just one week, but this Iron Monger BAF Wave is just irksome. Hasbro released the second batch like 3 months after the first one. I don't know why they did this but it was kinda annoying.

      Delete
  5. I've only seen the 2nd wave once at retail and that was while in Atlanta for a Braves game. They had one Ultron at a Target my wife and I hit, but I was tight on money so I passed. Never since have I found another one...or any other figure outside the first 3.

    ReplyDelete
    Replies
    1. We can hope that by mid-October we can see tons of those last 3 parts/figures on the shelf but at this moment, my speculation is either these figures are so hot that they get sold out pretty quick or Wal-Mart and Target are just limiting their stocks.

      Delete
  6. Do you have an extra head for this guy? That's the piece I'm missing.

    ReplyDelete
  7. Do you have an extra head for this guy? That's the piece I'm missing.

    ReplyDelete